Blind Creek Solar Farm and Battery Energy Storage System

Solar · Ms BCSF Holdings Pty Ltd as trustee for the Blind Creek Solar Farm Trust · Solar PV - Single axis tracking

Development AEMO: Publicly Announced Solar - Solar NEM data · 24 hours
Registered nameplate capacity — refresh AI for MW/MWh
Est. SRMC
$0.25/MWh
Key information

Capacity not yet researched — use Refresh equipment & project status (AI).

AEMO status Publicly Announced
Project status Development (AI)

DUID
Owner Ms BCSF Holdings Pty Ltd as trustee for the Blind Creek Solar Farm Trust
Commissioned
Expected closure
Closure date
Technology Solar PV - Single axis tracking
Fuel Solar - Solar
Module OEM
Module / inverter supplier
Inverter OEM
Inverter model
Stats window
03 Jun 2026 19:10 → 04 Jun 2026 19:10 AEST

Dispatch & revenue

03 Jun 2026 19:10 → 04 Jun 2026 19:10 AEST

No DUID specified. Open this page from the stats list or a generator profile.

Financial overview

2026 real AUD. Monetary values are CPI-adjusted to 2026 real Australian dollars. Greenfield capex uses AEMO benchmarks when plant-specific cost is unknown.
Type
Solar (tracking)
Capacity
Revenue (× MLF) (stats)
See dispatch stats link above
Est. SRMC
$0.25/MWh
Capex total (greenfield)
$518.35M

Shown in table
$518.35M (2026 real AUD)

Reported / source value
$491.40M (2024 nominal)
Adjusted to 2026 real AUD using Australian CPI (All Groups).

Capex refurbishment
Capex / MW
$1,371,308

Shown in table
$1.37M (2026 real AUD)

Reported / source value
$1.30M (2024 nominal)
Adjusted to 2026 real AUD using Australian CPI (All Groups).

Fixed OPEX (annual)
Fixed OPEX / MW-yr default
$20,000

Shown in table
$20.0k (2026 real AUD)

Variable OPEX / MWh default
$0.25

Shown in table
$0.25 (2026 real AUD)

Fuel cost / GJ
Heat rate GJ/MWh

Confidence: low · Status: ai estimated · Capex basis: default · AI checked 04 Jun 2026

Notes
Generator-level commissioned/online date and DUID not provided. AEMO/CSIRO benchmark values for solar PV (single-axis tracking) and associated O&M variable cost were not fully extracted in the available sources; therefore server-side defaults should be replaced once the relevant AEMO benchmark tables are located for large-scale (utility-scale) single-axis tracking (and aligned to MW vs MWp).

Sources